Better Roads Digital Magazine
Issue link: https://read.dmtmag.com/i/85916
GEHL Updated skid steers Gehl's newly updated 4640E and 5240E Power2 skid-steer loaders are equipped with a new 68-horsepower Yanmar Tier 4 Interim diesel engine that produces up to 180 foot-pounds of torque. The skid-steer loaders measure only 59.7 inches with the optional offset tire package. These skid steers can lift 2,050 pounds more than 121 inches when equipped with 12.00 tires and optional counterweight. Write 19 on reader card MITSUBISHI FUSO TRUCK OF AMERICA Medium-duty maintenance parts program Mitsubishi Fuso Truck of America has developed the Diamond Value Parts Program, a new repair and maintenance parts program for its medium-duty commercial trucks. All parts that are part of the program are intended for use after expiration of the FUSO warranty. Every product in the program has been vetted by Mitsubishi Fuso. Write 20 on reader card HENDERSON PRODUCTS APWA Electric control for snow and ice truck equipment Henderson's CHARGE Clean-Power Series offers a new electric control for medium-duty snow and ice truck equipment in Classes 3 to 7. The CHARGE harnesses electricity and employs a CAN bus system to manage the entire snow and ice control package. The bumper-to-bumper management covers the snow plow, dump body, lighting, sand/salt spreader, spinner and pre-wet system. The system incorporates proportional ground speed control into the spreader's material output functions, a feature, Henderson says, is commonly absent on spreaders using electric controls. Write 21 on reader card XL SPECIALIZED TRAILERS Hauling heavy MATS construction equipment XL Specialized Trailers' XL 120 Low-Profile (Scraper) Hy- draulic Detachable Gooseneck and the 110 Cheater Hydraulic Detachable Gooseneck are built especially for the construc- tion market. The 52-foot-long, 60-ton 120 HDG is rated with 120,000-pound overall capacity and 120,000-pound in 10 feet concentrated. The 12-foot, low-profile neck, open boom trough and 32-degree slope of rear transition makes loading scrapers and trucks of all sizes an efficient process. The XL110 Cheater Hydraulic Detachable Gooseneck offers nine pin locations, resulting in a range of swing clearance from 84 to 116 inches. Multiple ride heights allow drivers to adjust according to load and location. Write 22 on reader card WIRTGEN WOA Produces up to 900 tons per hour The Wirtgen W 220 cold mill provides the milling width and depth of the heavier W 250 – Wirtgen's biggest and most powerful mill – but with a lower weight that enables it to more easily meet legal weight load limits. The W 220 – like the W 250 – will mill up to 14 inches deep at a nominal milling width of 87 inches. Its power plant provides 766 horsepower has an operating weight of 80,160 pounds. The W 220 can produce up to 900 tons per hour of reclaimed asphalt pavement (RAP). The standard milling width of the W 220 can be ex- tended with additional milling drum units for working widths of 8.2, 10.2, 11.5, or 12.5 feet, up to a maximum of 14.4 feet. Write 23 on reader card Better Roads May 2012 39