Issue link: http://read.dmtmag.com/i/30009
Welding Positioners large offset load ProStar pipeturners are used to pipe in pipe spooling applications Note: shown with optional chucks 45” P Pipeturner 25” P Pipeturner 16” P Pipeturner PRS 45P-444 PRS 25P-100 Load Capacity Turning Torque Foot Print Power Requirements Operation Speed Height Adjustability Standard Features 400A rotary ground Variable speed, forward/reverse DC drive, comes with hand pendant Available Options 750A rotary ground On/off, forward/reverse, or variable-speed foot switches AC Vector Drive for precise speed control from 0–100%, rapid traverse functionality, and digital speed display Any size gripper or chuck Elbow jigs (see picture at right) for any size elbow between 2”–24” in diameter 36,000 in.-lbs. 72” x 42” x 77” 0.3–3 rpm PRS 16P-500 10,000 lbs. at chuck face 5,400 lbs. at chuck face 3,000 lbs. at chuck face 120,000 in.-lbs. 96” x 55” x 110” 18,500 in.-lbs. 72” x 42” x 77” 230/460V, 3-phase, 20A 230V, 3-phase, 20A 0.1–1 rpm 48”–96” in 6” increments 110V, 1-phase, 15A 0.3–3 rpm 29”–69” in 4” increments 45”–69” in 4” increments