Issue link: http://read.dmtmag.com/i/30009
WELDING AUTOMATION ProStar Pre-Engineered Welding Systems ™ PRS-55 Typical Part Sizes 12” x 53” 18” x 45” 24” x 30” Two-station turntable, manually driven Table diameter 60” with platens on both stations for fixtures Each station can hold 250 lbs. Ideal application: batch volumes of small parts that can fit into a half 60” circle to be welded in one position or walked through a progressive fixture. Low cost–starting under $60K Small footprint–see details below Productive–typically 3:1 vs. manual welding Lease option–cost can be less than a manual welder PRS-102S Typical Part Sizes 12” x 53” 18” x 45” 24” x 30” Two-station turntable, high-speed servo indexing Table diameter is 72” Each station can hold 400 lbs. Ideal application: high production of small and medium parts that can be welded in one position or walked through a progressive fixture. Parts and fixture must fit into a half 72” circle. Single point load/unload for high production or batch work. Servo table–accurate, fast, index in under 2.5 seconds Fast, easy install–built on one frame, place and go Versatile–fixture platen for fast changeover and provisions for air clamps and smart fixtures Options–torch reamer, seam tracking and more 66” 56” 113” 157”