Issue link: http://read.dmtmag.com/i/30009
CNC AUTOMATED CUTTING Laser Regulator Gas Start-Up Kits One Oxygen Assist Gas Regulator Assembly Inlet Connection CGA 540 (or 1/4” FNPT) One Beam Purge Gas Regulator Assembly Inlet Connection CGA 580 (or 1/4” FNPT) One to Three Resonator Gas Regulator Assemblies Inlet Connections 1 x CGA 320 (or 1/4” FNPT) 2 x CGA 580 (or 1/4” FNPT) with CO2 integrity of 1x10-8 lasers. These regulators feature helium holding scc of helium per second, stainless steel Easy installation and testing. Start-up kit includes all regulators, connections and hoses. Two gas line particle testers are included to verify that the copper oxygen and nitrogen assist gas lines were properly installed and are free of copper oxide ash. Praxair Part No. PRX Amada-1 PRX BLM Adige-2 PRX Bystronic-1 PRX Bystronic-3 PRX Cincinnati-1 PRX Cincinnati-2 PRX Cincinnati-3 PRX LVD-Strippit-1 PRX Mazak-1 PRX Mitsubishi-1 Trumpf-1 Trumpf-3 Prima-3 NTC-1 For “lights out” operations or multiple lasers, add FMS to the part number to replace the resonator gas regulator with the 2x2 switchover One Nitrogen Assist Gas Regulator Assembly Inlet Connection CGA 580 (or 1/2” FNPT) up to 2,900 psig inlet LaserStar™ “Lights Out” Switchover For Flexible Manufacturing Systems (FMS) or a multiple laser installation, the exclusive Praxair 619 switchover has a helium holding integrity of 1x10-9 scc of helium/second. This switchover is ported with four inlets for use with 2 to 4 cylinders of resonator gases per switchover. The kit includes two pigtails for each gas type. Two of the inlet ports are plugged for later expansion. Pigtails BRK 220252124H36320 BRK 220252124H36580 Option Stainless steel tubing from switchover to laser:LSU25T316L, qty. 20 ft.