Equipment World Digital Magazine
Issue link: http://read.dmtmag.com/i/370987
September 2014 | EquipmentWorld.com 14 marketplace | continued s 1/2" thick polyethylene s Supports 120 t o n vehicles s Leaves turf smooth in soft conditions s Withstands record heat & cold s Never get stuck again s 1/2" thick polyethylene s Features the bold diamond plate tread on one side and a finer, slip-resistant tread on the other side s Ideal for 12 0 t o n vehicles as well as pedestrian traffic sales@alturnamats.com Call for the name of your nearby dealer: 888-544-6287 www.alturnamats.com We've Got You Covered SAFETY TECH OUTRIGGER PADS Rugged, one piece pads with rope handle. Available in wide variety of sizes to suit every or any application. Turn-A-Links - Lock mats together to form a continuous roadway Handi-Hooks - Steel rod makes moving mats easier MAT-PAK - The complete package. Call for details. Whatever you need in ground protection mats, is your ORIGINAL source PRECISE PLANER Achieve precise grades efficiently with Attachment International's Super Land Plane, a skid steer attachment that can be pushed for maximum cutting power and used in reverse for leveling. The unit has sifting bars that sort unwanted debris, as well as allowing for transporting and dumping at different locations. For difficult material such as shale, an optional hydraulic ripper is available. NEW BREAKER LINE Hyundai Construction Equipment has introduced a line of hydraulic breakers, their first entries into the North American attachments market. Consisting of 14 different models, the HDB10 through HDB800, the breakers have a chisel diameter from 1.6 to 7.9 inches, and are suitable for all sizes of Hyundai excavators. Operating weights range between 271 to 12,401 pounds, with lengths ranging from 44.4 to 159.8 inches. Four chisel options – moil, wedge, blunt or conical – are available, and the breakers include an Anti Blank Firing system that is standard on HDB50 through HDB800 models. An Auto Control valve enables breaker operation to automatically start again via a small amount of pressure applied to the chisel, and will automatically stop once the chisel is lifted or breaking is complete. A two-stroke selector system is standard on HDB50 through HDB180 models, which allows the operator to change from long to short strokes. An Energy Regeneration Valve is standard on the HDB600 and HDB800 models. The system captures upward flow energy after the piston hits the chisel and retracts, harnessing up to 15 percent of the energy to be applied on the flow energy back down, increasing blow speed and boosting production rates. Additional features include NOK oil seals for long seal life, including an additional square buffer that increases durabil- ity and minimizes shaking action on the HDB210 to HDB800 models. An optional Auto Grease Bracket Mounted system that allows for automatic greasing is available on the HDB140 to HDB800 models.