Issue link: http://read.dmtmag.com/i/494044
6 ppc@pulsetech.net www.pulsetech.net 800-580-7554 XCR Xtreme 16A 12V Battery Recovery Charger and Desulfator BATTERY SHOP RECOVERY CHARGERS 6 Input Voltage: 110-240 VAC Min. Voltage for Startup: 4 Volts Output Current: 16 A DC Output Voltage, Bulk Charge: 14.9 Volts Dimensions: 14.2" x 11.4" x 6.5" Enclosure: Black HPX Plastic Battery Cable Length: 6' Specifications • Recovers heavily discharged and sulfated batteries • Works on all 12V AGM, VRLA, gel and flooded cell batteries • Ideal for larger 12V batteries including group 31, 4-D and 8-D • Removes and prevents sulfate buildup on the battery plates • Don't throw dead batteries away, recover them The XCR is a 16-Amp shop recovery charger built to recover any type of 12-Volt lead-acid battery (VRLA, AGM, gel and flooded cell) anywhere in the world. It is ideal for larger 12-Volt batteries including those in groups 31, 4-D and 8-D. The XCR is housed in a self-enclosed, convenient, water-resistant heavy-duty case for easy storage and portability allowing batteries to be charged both in and out of the vehicle or piece of equipment. When servicing vehicles or equipment with 12-Volt batteries, this state-of- the-art Recovery Charger allows heavily discharged and sulfated batteries previously thought dead or useless to be recovered. With its higher output capacity the XCR is used extensively in businesses using larger batteries that need to be recovered and quickly put back into service. Its unique design allows the XCR to be operated both in the shop on batteries that have been removed from equipment and on batteries still installed in equipment, reduc- ing man hours. The XCR applies PulseTech's optimized high frequency, patented Pulse Tech- nology waveform to each battery. Pulse Technology both prevents and re- moves sulfation buildup which occurs as lead sulfates form on the battery plates during normal charge/discharge cycles. These deposits can reduce the battery's ability to accept and keep a charge. Pulse Technology breaks down the deposits, improving battery performance and extending battery life. Prior to charging, the red TEST LED will light while the charger tests the bat- tery and separate red LEDs will indicate whether the battery is bad and not recoverable. During the bulk and saturation charging process, the microprocessor con- trolled circuitry provides all the charge the battery will accept regardless of the Amp-hour capacity or rated cold cranking Amps. The XCR will charge to the battery's optimum level by constantly monitoring the battery and adjust- ing the charging current accordingly. LEDs show the battery's state of charge at 25%, 50%, 75% and 100%. When the charge is complete as indicated by the 100% green LED, the XCR provides a float charge to maintain the battery at 100%. During the pulse mode, green pulsing LEDs will flash in sequence. The XCR is also used in the recovery portion of PulseTech's Battery Management Program. See pages 8 and 9 for more information. LED INDICATORS Status O On O Pulsing O Pulsing O Pulsing O Charging Battery O 100% O 75% O 50% O 25% O Test O No Connection O Bad Battery The XCR-20 is housed in a convenient, portable, heavy-duty case. LEDs allow users to understand what is happening to the battery during the recovery and charging process with minimal operator training. The XCR also features over temperature protection and output current limit protection so that during the battery charging process monitoring isn't necessary. One-year limited warranty. 100X500 XCR Xtreme Recovery Charger and Desulfator $739.95