Issue link: http://read.dmtmag.com/i/814629
Technical Training and Reference Info Metalworking Technical Training Cutting and Grinding 1 800 255 4417 www.castrol.com/GPS March 2017 Metalworking Fluid Types The two basic classes of metalworking fluids include neat cutting oils and water-miscible coolants. Neat Cutting Oils Neat cutting oils, also called straight oils, contain no water and are designed to be used straight from the container as received -– without dilution. They are comprised of base oils and additives. The base oil is typically a mineral oil, but may also be synthetic oil, vegetable oil or a combination of fluids. Base oil quality can vary greatly within each type, so careful selection is essential to creating a high-quality finished cutting fluid. Additives are used to enhance finished fluid properties such as lubrication performance, misting characteristics, foaming resistance, odor and fluid life. A typical neat oil formulation may include: • Base oil (often 90+% of the formula) • Boundary lubricants (fats, fatty esters) • EP lubricants (chlorine, sulfur, phosphorus) • Corrosion inhibitors • Wetting agents • Anti-mist agents • Defoamer • Odor masking agents • Anti-oxidants Viscosity plays an important role in the performance of a cutting fluid and should be chosen based on the application details. The advantages of low versus high viscosity oils are shown in Figure 6. For example, low viscosity oils have better cooling abilities while high viscosity fluids are best for slow cutting speeds. Generally speaking, neat oils are used in applications with the highest lubrication requirements (such as machining hardened steel) in order to achieve acceptable cutting speeds and tool life that would not be tolerable using water-based fluids. Lower Viscosity Higher Viscosity Cooling X Flow through small orifices X Oil carry-off on parts X Cleanliness X Filterability X Size control X High cutting speeds X Slow cutting speeds X Lubricating film thickness X Flash point X Smoke X Mist/splash X X denotes the viscosity with the advantage Water-Miscible Coolants Water soluble metalworking fluids are supplied as a concentrate and mixed with water by the end user to the appropriate concentration for the application. They fall into three main types: • Soluble oils • Semi-synthetic • Synthetic Soluble Oils Soluble oils are formulated primarily with mineral oil and emulsifiers in order to form an emulsion when mixed with water. Additives may be used to provide bio-resistance, foam control, corrosion protection and emulsion stability. A typical soluble oil formulation may include: • Mineral oil (50 – 80%) • Emulsifiers • Coupling agents • Lubricant package (Boundary and EP) • Corrosion inhibitors • pH buffers • Biocides • Defoamer Figure 6. Advantages of low versus high viscosity oils. Q5

