Castrol GPS

GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES

Issue link: http://read.dmtmag.com/i/814629

Contents of this Issue

Navigation

Page 244 of 385

Technical Training and Reference Info Metalworking Technical Training Cutting and Grinding 1 800 255 4417 www.castrol.com/GPS March 2017 Metalworking Fluid Types Synthetic Coolants Synthetic coolants are free of oil, so they form a true solution rather than an emulsion. Water-soluble components are selected to provide lubrication, corrosion protection and buffering of the solution. Water is included in the concentrate in relatively high volumes (compared to semi-synthetics) in order to maintain its stability. Upon dilution, synthetics form a clear solution because they contain no oil (Figure 10). Most synthetic coolants (90+%) are oil-rejecting. They are formulated to separate readily from tramp oil (hydraulic, slideway, spindle) to allow easy skimming. Oil-accepting synthetics are also available; these are designed either to bring some oil into the solution permanently or disperse it temporarily. Oil-accepting synthetics can provide additional corrosion protection and handle large volumes of tramp oil better than oil-rejecting synthetics. They are also useful in cast iron systems in order to avoid clinkering (rusty masses of chips). A typical oil-rejecting synthetic coolant formulation may include: • Wetting agents (surfactants) • Lubricant package (nonionic polymers, esters) • Soaps (fatty acids) • Corrosion inhibitors (fatty acids, borate salts, bi-metallic inhibitors) • Bio-resistive agents (amines, quaternary compounds, borate salts) • Water Since they are oil-free, synthetics provide excellent cooling, no smoke and long-term stability even in very hard water conditions. Lack of oil does provide challenges with regard to corrosion protection and machine compatibility (plastics, paints, elastomers), which are not often problems with semi-synthetics. Figure 10. Synthetics form clear solutions when mixed with water because they contain no oil. Comparison of Metalworking Fluid Types The four classifications of cutting fluids and their properties are shown in Figure 11. As oil content increases, physical lubrication characteristics of the fluid improve while the cooling ability is reduced. Classification Oil Content Straight Oils 100% Soluble Oils 40% - 80% Semi-Synthetics 10% - 40% Synthetics 0% Cooling Lubrication Figure 11. Oil content and lubrication/cooling properties of the various cutting fluid types. Q7

Articles in this issue

Links on this page

view archives of Castrol GPS - GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES