Castrol GPS

GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES

Issue link: http://read.dmtmag.com/i/814629

Contents of this Issue

Navigation

Page 252 of 385

Technical Training and Reference Info Metalworking Technical Training Cutting and Grinding 1 800 255 4417 www.castrol.com/GPS March 2017 Machining Operations Grinding Grinding is the act of applying an abrasive wheel or belt to a workpiece with a force perpendicular to the contact zone. Material is removed from the workpiece and wheel/belt, which is controlled by the grit type, grit size, grinding speed, etc. Grinding is often used as a finishing process after another metalworking operation. Cooling and flushing are the main requirements of the cutting fluid so as to keep the grinding wheel from loading up. For this reason, basic synthetic coolants and low oil semi-synthetics are preferred. For heavier duty grinding operations such as hardened precision steel workpieces and other difficult metallurgies, higher lubricity coolants or neat oils may be needed, especially to avoid metallurgical damage to hardened workpieces. Type Description Surface Grinding performed for obtaining a smooth finish on a flat surface. Cylindrical Grinding used to shape the outside of an object. The workpiece and grinding wheel are constantly moving. Centerless The workpiece is secured between a regulating wheel, which controls the RPM of the part, and the grinding wheel, which rotates faster. Used for creating true-round parts. Internal Grinding of the bores or holes in a workpiece. Form The shape of the grinding wheel is imparted to the workpiece. Honing This is an abrasive machining process whereby an abrasive stone is scrubbed repeatedly against the metalworking piece to give a precision surface. Typically, this type of machining is used to improve the surface texture and geometric form of the surface. Honing is commonly used as the final process on the cylinder bores of engine blocks to create a cross-hatch lay pattern (see below) that can retain a lubricating film better than a perfectly smooth surface can. Honing Superfinishing Improves the surface of the workpiece and imparts the desired texture. Removes metal irregularities from previous operations using abrasive stone, tape or cup wheel. Q15

Articles in this issue

Links on this page

view archives of Castrol GPS - GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES