Issue link: http://read.dmtmag.com/i/814629
Corrosion Preventives Technical Training and Reference Info Metalworking Technical Training 1 800 255 4417 www.castrol.com/GPS March 2017 Figure 2. Examples of dip tanks. Image courtesy of RAMCO. Corrosion Preventive Types Specialty Corrosion Preventives Specialty type corrosion preventives often contain natural and synthetic wax emulsions, which are dispersed in a water carrier, designed to be used neat or diluted depending on application needs. Their unique properties impart rust protection, dry-film lubrication, and a medium gloss film for improved appearance of components. The lubrication aspect can help eliminate steps in the manufacturing process by helping with ease of assembly to finished parts (i.e., no need for a separate lubricant prior to assembly). On fasteners, this characteristic provides an excellent torque reduction feature for easier fastening. Recommended uses for these products may include artillery shell casings, small arms ammunition clips, weatherproofing military applications, lubricant for steel strapping, piano stringing lubricant, torque reduction for fasteners and rivets, decorative coating on cast iron, protection of treated surfaces (phosphated, bonderized, anodized, cadmium-plated, zinc-plated surfaces), mold release for gold leaf, joint lubricant for umbrella-type television antennas, dressing on rubber, plastic and leather and/or to provide surface protection and Application Methods The three most common methods of corrosion preventive application are dip, spray and roller/brush. Dip Method The advantages of the dip method are: • Full part coverage • Best method for water-displacement from parts — Dip tank should be decanted regularly to remove collected water • Simple and can be automated The dip method does have some drawbacks: • Excess carry out, especially if parts have blind-drilled holes or crevices • Little cleaning action, unless parts are in motion while submerged in tank Carry-out can be reduced by part rotation, or tipping, on dip tank exit. A drainage station with catch pan next to the dip tank can recover drained rust preventive. This drainage should be returned to the tank promptly, especially with solvent fluids, as evaporation will skew the solvent to film-forming ratio. Spray Method The advantages of the spray method are: • Controlled product application • Can be automated and adjusted • Can provide washing/flushing/cleaning action Using the spray method does require some provision for containing any overspray and drainage. A common spray method application is in the second or third stage of a multi-stage spray washer. Distinct disadvantages of the spray method include: • The potential for lack of coverage, especially if: — Protected parts have non-uniform features — Parts have hard to reach features that require protection • Spray equipment requires maintenance and cleaning Q42

