Issue link: http://read.dmtmag.com/i/814629
Technical Training and Reference Info Lubrication Technical Training 1 800 255 4417 www.castrol.com/GPS March 2017 Greases and Bearings Bearing Failures All bearings will eventually fail, but the length of time it takes is dependent upon many factors. The theoretical (L10) life of a bearing is determined by: • Speed • Load (actual and load-rating) • Life Adjustment Factors (material, load and temperature) Higher speeds, higher loads and difficult working conditions such as high temperature and contamination will all reduce the life of a bearing. In addition, poor maintenance practices such as installation error and improper lubrication will further reduce bearing life. Studies have shown that inadequate lubrication, contamination and installation error account for a large majority (over 70%) of bearing wear and failures (Figure 26). Proper lubrication has been discussed extensively throughout this document. Contamination control is discussed in more detail in the Hydraulics section. It is important to note that proper installation practices must be used to ensure that the bearing is properly aligned, located and loaded to prevent failures. Maintenance personnel must be trained and have the proper equipment for installing bearings. Generally, training and equipment is available from the major bearing manufacturers. Bearing failure modes can be assessed to help determine the root cause in order to prevent repeat breakdowns. Common failure modes and their solutions are discussed in figure 27 on the next page. Figure 26. Major causes of bearing failures. R67

