Issue link: http://read.dmtmag.com/i/814629
Technical Training and Reference Info Lubrication Technical Training 1 800 255 4417 www.castrol.com/GPS March 2017 Compressors Compressor Oils Synthetic PAO Polyalphaolefins (PAO) are also called synthetic hydro- carbons, or SHC. They provide a high viscosity index and good oxidation resistance at a relatively low price. Overall advantages: Typically lowest cost synthetic, good oxidation resistance, good compatibility with seals and other oils, high viscosity index Overall disadvantages: Low additive solubility, higher residues than other synthetics Synthetic Ester Polyol ester and diester are the main types of synthetic ester used in compressor oils. These oils provide excellent oxidation stability and low residues. They are often added to other oil types to improve the overall finished lubricant. Overall advantages: Excellent solubility, very low deposit formation, very high oxidation resistance, good compatibility with other oils Overall disadvantages: Seal swelling, paint incompatibility, hydrolyze in the presence of high temperature and water, high cost Synthetic PAG Polyalkylene glycol (PAG) is a full synthetic base oil with unique properties as compared to other oils, including miscibility with water. PAGs have excellent lubricating properties but are incompatible with most other oils (excluding some esters) and are more costly than other base oils. Overall advantages: Very high viscosity index, low deposit formation, resistance to water degradation, high oxidation resistance Overall disadvantages: Very high cost, incompatible with paints, incompatible with most other oils Compressor Oil Selection Most importantly, the ideal compressor oil should have the correct viscosity for the application. High oxidation resistance, water compatibility and wear protection properties may also be important, depending on the application. The main factors to be considered are: • OEM recommendations – the equipment manufacturer will typically publish oil specifications • Compressor type – the compressor oil selection will depend on the type of compressor and specific application for which it be used • Temperature – oil temperature and the final temperature of the air will help determine what level of oxidation resistance is required • Oil change frequency – for users who wish to extend oil life, higher quality lubricants will be needed • Seal compatibility – seals should be reviewed, as synthetics have varying compatibility with elastomers • Gas to be compressed – the selection of compressor oil is also dependent on the medium to be compressed, as it is not always air • Compressor condition – compressors with deposit build-up can benefit from ester-containing lubricants A summary of the oil types and viscosity range used for each compressor application is shown in Figure 6 on the next page. R83

