Issue link: http://read.dmtmag.com/i/814629
Technical Training and Reference Info Lubrication Technical Training 1 800 255 4417 www.castrol.com/GPS March 2017 Gears Types of Gears Due to varying needs and applications, there are several types of gears. A basic knowledge of the most common types of gears, their components and their methods of operation is helpful for understanding which lubricant will enhance gear performance. Figure 5 includes an overview of common types of gears encountered in today's equipment. Typically, a gear type is named for its general shape or by the arrangement of its teeth. In addition, there are various shaft orientations depending on the gear type. Knowledge of these shaft orientations can aid in identifying gear types in the field. The differences in the action between the teeth of different types of gears impact the lubricant properties that are required to achieve satisfactory lubrication. Type Description Schematic Shaft Type Friction Type Spur • Straight teeth • Single tooth in contact at any time • Can be noisy Parallel Sliding and rolling Helical • Angled teeth • Multiple teeth in contact • Thrust-load generated • Higher load carrying and quieter than Spur Parallel Sliding and rolling Double Helical • Two sets of opposite-angled teeth • Prevents thrust loading associated with Helical Parallel Sliding and rolling Bevel • Straight teeth • Single tooth in contact • Changes shaft direction Perpendicular, intersecting Sliding and rolling Spiral Bevel • Spiral teeth • Multiple teeth in contact • Changes shaft direction • Higher load carrying and quieter than Bevel Perpendicular, intersecting Sliding and rolling Worm • Worm meshes with a wheel • Very compact design • Special oils needed to overcome high sliding Perpendicular, non-intersecting High sliding Hypoid • Curved teeth • Special oils needed to overcome high sliding • Infrequent use in industrial applications Non-parallel, non-intersecting High sliding Figure 5. Common gear types. R25

