Issue link: http://read.dmtmag.com/i/814629
Technical Training and Reference Info Lubrication Technical Training 1 800 255 4417 www.castrol.com/GPS March 2017 Hydraulics Figure 11. Main functions of the hydraulic fluid. Functions of a Hydraulic Fluid To perform work, a hydraulic fluid needs to transmit power within the system. If this were the only need of the fluid, water could be used. But in fact, many other hydraulic fluid functions are required, as well. • Lubrication of pumps, valves and cylinders is one of the most important requirements of the hydraulic fluid. — The pump, in particular, has the greatest lubrication needs due to its high-speed components in sliding action. For this reason, the required fluid viscosity and additives generally are dictated by the needs of the pump, including the addition of anti-wear agents to reduce wear. — Valves and actuators are typically more forgiving in terms of the lubricant properties, but still require good lubrication for long life. • Hydraulic fluids also cool components, transport away dirt and other contaminants and protect the system from corrosion. protect against wear transport heat protect against corrosion transport debris and contamination transmit power lubricate Pumps, valves, actuators Mineral oils are by far the most common type of hydraulic fluid since they perform the required functions very well and are relatively inexpensive. Fire-resistant fluids are often synthetic or water-based, as they fulfill the additional function of reducing fire risk. Hydraulic Fluid Types Hydraulic fluids based on mineral oil are the most common found in industry due to their excellent lubricating qualities, good life and relatively low cost. Several types are available, as summarized at right. The type and viscosity of oil should be selected based on the OEM (original equipment manufacturer) specifications. R&O (rust and oxidation inhibited) oils are generally only recommended for low pressure systems where pump wear would be minimal. AW (anti-wear) oils are the most common type of mineral oil-based hydraulic fluids, as they include additives that provide additional wear protection for the pump. Of these, zinc anti-wear additives are most common; they provide multiple functions, including oxidation resistance, and are relatively inexpensive. • Basic additives to control corrosion and oxidation • Used only in low pressure, non-critical systems • No AW additives to protect the pump • Anti-wear additives to protect pump • Most common hydraulic fluid • Zinc and zinc-free types available • Additive included to boost viscosity index • More suitable over wider temperature range than other hydraulic oils R42

