Castrol GPS

GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES

Issue link: http://read.dmtmag.com/i/814629

Contents of this Issue

Navigation

Page 337 of 385

Technical Training and Reference Info Lubrication Technical Training 1 800 255 4417 www.castrol.com/GPS March 2017 Hydraulics Hydraulic Fluid Sampling and Oil Analysis Proper sample ports installed on the hydraulic system will make the taking of samples easier and more consistent. Mini-mess sampling port (Figure 26) is a common style that can be installed inline and used for pressure testing, gas relieving and oil sampling (with the use of an adapter). Many other styles are available to suit various needs and locations. Figure 26. Mini-mess sampling port (left) and port adapter/tube assembly (right). Screwing adapter and tube assembly onto port slowly opens the valve. Sample Frequency The frequency of taking samples should vary, depending on such factors as: • Unit criticality • Known problems that require monitoring • Degree of contamination • Sump size Critical systems should have samples taken as often as monthly but no less than quarterly. Other less critical systems are typically sampled every three to six months. And non-critical, small systems should not be sampled, but should simply be scheduled for oil changes on a time Code Description Action A High criticality. Breakdown results in high costs and/or significant downtime. Samples taken frequently. Maximum suite of testing is conducted. Use of inline equipment to measure oil properties (particle counters, water monitors, etc.). B Moderate criticality Sampled on normal frequency with advanced suite of tests. C Low criticality Sampled infrequently with basic suite of tests or changed on time basis. D Not critical. Breakdown results in low cost and no downtime. Not sampled. Changed on time basis. frequency. A criticality chart like the one shown in Figure 27 below should be developed for your specific needs. The amount of time for the entire oil analysis process must be considered when developing the sample frequency, as it can be time consuming to submit samples, complete lab analysis, receive reports, review/analyze data and complete corrective actions. In addition, corrective actions indicated by the previous sample must be completed prior to taking the next sample in order to achieve any improvements in results. Hydraulic Oil Analysis The oil analysis program should follow these basic steps: 1. Determine criticality of equipment (A/B/C/D – see Figure 27) 2. Based on criticality: determine lube points to sample, sample frequency and build control plans for each (see Figure 28) 3. Schedule sample-taking via maintenance program 4. Take samples and submit to the lab 5. Review results and determine corrective actions 6. Schedule and implement corrective actions 7. Review systems that need repeat corrective actions and identify improvements to eliminate the issue Control plans should be developed for all system types, detailing the sample frequency, tests to be run, test targets and corrective actions to take when test results are outside of targets. Figure 28 is an example of a control plan for a high-pressure servo-controlled hydraulic unit. Figure 27. Example of criticality chart to help determine frequency of oil sampling. R51

Articles in this issue

Links on this page

view archives of Castrol GPS - GUIDE TO INDUSTRIAL PRODUCTS AND SERVICES