PulseTech

Fall 2012

Issue link: http://read.dmtmag.com/i/87214

Contents of this Issue

Navigation

Page 5 of 15

PulseTech Products Corporation's Solar Technology All of our SolarPulse® family models use the power of the sun com- bined with our patented optimized high frequency pulsing circuit to charge, maintain and condition batteries so they can accept, store and release maximum power when needed. Laboratory testing shows dramatic increases in the number of cycles you get from your batteries using our SolarPulse systems. If you've used solar chargers before, you know it's important to choose the right solar panel for the amount of power you need and the size and place of the mounting location. In the past, to get the power you needed you had to struggle with panels that were too big, too bulky and too fragile. With SolarPulse, you can get the power you need with the most installation options for your outdoor vehicles or equipment. SolarPulse's higher efficiency, higher quality crystalline silicone cells pack more power per square inch than standard amor- phous "thin film" solar cells and have a longer life. That means you can get the power you need in a sturdier, smaller sized solar panel. Instead of a breakable glass coating, SolarPulse's solar panels are protected with a clear, polyurethane plastic coating mounted on a laminated aluminum substrate to make them virtually indestructible and impervious to weather, aging and damage from bumps and knocks. "I drove right over the [solar] panel and pressed it into the soft ground leaving a nice bend in it.... on closer inspection I found it was not broken. I put it back in the sun and looked over and sure enough the LED light was glowing bright, it still works! I remembered a discussion about the con- struction of the panel and how it was not glass like other brands but I never would have expected it to withstand that kind of abuse." — Ray Pfaff To choose the correct output solar maintenance system, contact our PulseTech experts for advice. SP-25 12-Volt Solar Charger Maintainer, 25-Watt The SP-25 12V Solar Charger Maintainer provides a full 25-Watts of power in a compact, durable solar panel. The SP-25 maintains and desulfates two to four 12-Volt batteries connected in parallel. It's ideal for virtually any kind of vehicle and equipment that uses batteries connected in parallel, including tractors / prime movers, generators, oil and gas field equipment, boats, and much more. It is engineered to replace the power loss from electrical acces- sories that occurs even when the ignition is switched off. "I've worked in [the marine] industry for over thirty years, and I know first- hand the necessity of battery reliability on the water. The PulseTech products my customers use are incredible. They are increasing battery reliability and reducing their costs." — Barry Quarry, Owner of Quarry Marine Gibsons. 735X325 SP-25 12V Solar Charger Maintainer, 25-Watt ..............$695.00 Specifications Input Electrical: Solar Powered Output Electrical- Output Current: 1.6 Amps Output Voltage, Maximum: 14.8 Volts Mechanical/Physical Characteristics- Solar Panel Dimensions: 17.75" x 21.25" x 0.125" 6 sales@pulsetech.net www.pulsetech.net 800-580-7554 Circuit Box Dimensions: 5.25" x 2.50" x 1.3" Box to Lug Wire Length: 32" Box to Panel Wire Length: 25' Not to be used on a single battery. SOLAR MAINTENANCE CHARGERS

Articles in this issue

Links on this page

Archives of this issue

view archives of PulseTech - Fall 2012