Issue link: http://read.dmtmag.com/i/87220
Pro-12 12-Station Battery Maintainer • Preserves new and restored 12V batteries at peak charge levels • Keeps plates in like-new condition during storage • Maintains one to 12 batteries at a time The Pro-12 preserves new batteries at peak charge levels by keeping the plates in like-new condition during storage, and it maintains up to twelve batteries at a time. A continuous cycle of low amp charging rotates through the 12 channels reversing the normal discharge rate. Optimized high frequency patented pulsing reduces the size and num- ber of lead sulfate deposits so both new and restored shelved batteries stay "factory fresh". Using the Pro-12 is straightforward and safe. Connect from one to twelve 12-Volt batteries from a single AC outlet. An audible alarm sounds if the cable connections are reversed. The Pro-12 initiates a self-test then cycles through each of the batteries. LEDs indicate if the battery is discharged, mar- ginal or ready for issue. System is not designed for batteries below 11.5 volts. 746X912 NSN 6130-01-535-2718 Pro-12 12-Station Battery Maintainer Specifications Output Current: 750 mA Input Voltage: 100 VAC to 240 VAC Input Current: 140 mA Dimensions: 7.25" x 2.25" x 1" Weight: 2 lbs. Box-to-Clamps: 72" X2 Xtreme Charge® Two-Station Battery Charger • Charges and maintains two 12-Volt lead-acid batteries • Works on two independent or two in-series batteries • For VRLA, AGM and flooded 12-Volt batteries Doubling your charging capability saves time and money. The X2 indepen- dently monitors, charges and maintains two 12-Volt lead-acid batteries from one AC outlet without overcharging. Simply plug them in and walk away. This unique 12-Volt charger can also be used in 24-Volt systems composed of two 12-Volt batteries connected in series like in military vehicles and equipment. This fuse-protected, spark-proof maintenance charger works automatically on any type of 12-Volt lead-acid battery – VRLA, AGM and flooded. Proprietary algorithms combined with microprocessor controlled technology measure the battery's voltage and current to determine and deliver the precise charge rate based on the size and condition of the individual battery, both ini- tially and continuously throughout the five-stage charge process. Status lights show when the unit power is on, pulsing and charging, plus indicate the percentage of the battery's state of charge – 25%, 50%, 75% or 100%. During the maintenance cycle PulseTech's patented, op- timized frequency pulsing constantly works to minimize and reduce naturally occurring battery sulfation – the main cause of failures. Thus the battery will charge deeper, maintain greater reserve capacity and last longer. 100X200 NSN 6130-01-458-0984 X2 Xtreme Charge Two-Station Battery Charger 10 DLA Inventory Stock Item: NSN 6130-01-458-0984 Specifications Output Current: 2.5 A dc Max per Station Input Voltage: 100 V ac to 250 V ac Input Current: 0.6 Amps Max Dimensions: 7.9" x 6.3" x 2.4" Weight: 2.73 lbs. Power Cord Length: 6' Main Battery Cable Length: 2.73 lbs. Lug/Clamp Cable Length: 2' www.pulsetech.net 800-580-7554 MAINTENANCE CHARGERS