GEAR GUIDE
LIGHTS
HIGH-POWER LEDS
United Pacific's rectangular crystal headlight features one high-power LED
and six LED position lights, available in low- or high-beam modules. Both
applications are 12-24 volt DC input.
The low-beam application is 0.50-0.60 amps at 13.5 volts DC (9 watts)
and 0.25-0.35 amps at 28 volts DC (10 watts) with a lumen output of 550.
The high beam application is 0.90-1.10 amps at 13.5 volts DC (15 watts) and
0.50-0.60 amps at 28 volts DC (17 watts) with a lumen output of 620. The light
measures 6 inches by 4 inches.
United Pacific Industries, uapac.com, 800-790-6988.
6
PHOENIX P1 LIGHTS
Phoenix Design & Manufacturing's P1 lights feature a circuit board
fully immersed in epoxy resin to protect against vibration and water
intrusion. It also has engineered optics, an internal reflector plate and
135-degree LEDs, which distribute the light over the entire lens and
give a variety of optical effects from different angles.
The lights also feature concealed mounting fasteners under a bezel.
The wires exit the lamp base through silicone sleeves to aid against
wire chafing, and the lights are not polar-sensitive, so either wire can
be positive and the other a ground.
Phoenix Design & Manufacturing, phoenixdesignmfg.com,
888-789-2550.
M1 LED LIGHT
Dieter's M1 light, part of its Millennium Series line, features a high
quality polycarbonate lens surrounded by a polycarbonate bezel
with chrome plating. The M1 light comes in amber incandescent, red
incandescent, amber LED, red LED, clear lens with amber LED and
clear lens with red LED. The light is 6.625 inches by 2.19 inches. The
LED is a 12V, 0.12 amp light, and the incandescent comes in 12V,
0.33 amp and 24V, 0.17 amp varieties.
Dieter's Accessories, parts.dietersaccessories.com, 877-884-8555.
FLATLINE MARKER LIGHT
The new Flatline Marker Light by Trux Accessories features
30 high-output LEDs sonic-welded to a circuit board and
base. Air is sucked out of the light to prevent condensation,
protecting the diodes from moisture. The TLED-FGCA marker
light has slotted mounting holes so it can replace almost
any oval light in the market, the company says. No drilling is
necessary in most cases.
Trux Accessories, truxaccessories.com, 888-950-2227.
Lights.indd 6
5/9/13 2:11 PM