Landscape and Irrigation is read by decision makers throughout the landscape and irrigation markets — including contractors, landscape architects, professional grounds managers, and irrigation and water mgmt companies and reaches the entire spetrum.
Issue link: https://read.dmtmag.com/i/602685
42 November/December 2015 Landscape and Irrigation www.landscapeirrigation.com EQUIPMENT FOCUS UTILITY VEHICLES CUB CADET CHALLENGER SERIES Cub Cadet is expanding its UTV lineup with the launch of the new Challenger Series. With one of the best standard equipment packages in the industry, the Challenger Series comes equipped with a hard-top roof, a quick-release windshield, alloy wheels, a front-mount winch, large-profile 26-inch off-road tires and digital display. The 2 units in the series — the Chal- lenger 500 (EFI) and the Challenger 700 (EFI) — feature on-demand 4-wheel drive, high- strength components, and the power needed to challenge trails and tough terrain along with a 1,200-pound towing capacity. Available in yel- low and camouflage, the Challenger 500 and 700 not only offer the strength that Cub Cadet is known for, but they are backed by excep- tional service and parts availability through Cub Cadet's expansive dealer network. Dealers can also offer a range of accessories and attachments, including snow blades, light bars and hood racks, to enhance the versatility of these UTVs. CUSHMAN HAULER 4X4 CREW Designed to move workers around a jobsite without compromising power or payload, the Cushman Hauler 4X4 Crew can comfortably seat four crew members on two rows of bench seating. Its performance is built on a 3-cylinder, 22-hp. diesel engine, with continuously vari- able transmission and user-selectable 2WD or 4WD. Four-wheel independent suspension ensures a smooth, safe ride on any terrain. This powerhouse has a 1,325-pound payload capacity and can tow up to 1,300 pounds. For enhanced safety, the Cushman Hauler 4X4 Crew is equipped with three-point seatbelts and a Rollover Protection System (ROPS). EXMARK 500S AND 700S UTILITY VEHICLES Exmark has expanded its 2015 product line to include 2 side-by-side utility vehicles — the 500S and 700S. The new models deliver the productivity that professionals demand with switch-on-the-fly, 2- or 4-wheel drive and a dual-range automatic CVT transmission. The 700S adds an electric locking front differential. The 700S has a total payload capacity of 1,500 pounds (1,100 pounds for the 500S). The transformable, tilting rear cargo box can quickly be converted to a flatbed. Integrated front and rear, 2-inch receivers allow trailers or attachments to be attached at either end of the machine. Both machines feature power- ful, liquid-cooled, single-cylinder engines with electronic fuel injection (EFI). The 700S uses a 695-cc single overhead cam (SOHC) engine, while the 500S uses a 443-cc SOHC powerplant. Standard features include 4 wheel hydraulic disc brakes, as well as dual A-arm front and rear suspension with 10 inches of travel and 10 inches of ground clearance. The 700S also has upgraded alloy wheels. GRAVELY ATLAS JOB SITE VEHICLE The Gravely Atlas Job Site Vehicle (JSV) was designed specifically for heavy jobsite work. With a 1,900-pound payload and 2,000-pound towing capacity, the Atlas JSV allows work crews to literally haul a ton. Supported by an on-demand, true all-wheel drive system and De Dion rear suspension, the Atlas JSV provides the heavy-duty traction and suspension required to maintain full ground clearance and a smooth ride even when carrying maximum loads. The all-steel MX-18 JobBox features a 1,250-pound capacity, steel walls to prevent bowing, and 4 integrated tie-down points to secure cargo. The 48-inch by 57-inch bed easily accommodates a standard wooden pallet, and an electric cargo bed lift is standard on all models. The Altas JSV-3000 fits 3 adults comfortably across 1 bench seat, while the Atlas JSV-6000 crew model fits 6 adults across 2 bench seats. Both models are available with a 1-cylinder, 570-cc Polaris DOHC gas engine or a 3-cylinder, 1,028-cc Kohler diesel engine. All engines provide a 10-gallon fuel capacity and ground speed of 35 mph. A full slate of accessories is available. JOHN DEERE GATOR XUV 825I The John Deere Gator XUV 825i offers best- in-class ride quality and terrain capability with a 50-hp., 812-cc engine. The 825i boasts a top speed of 44 mph. Operator Side Reten- tion (OSR) is standard. A Warn ProVantage 3,500- or 4,500-pound winch increases pulling capacity up to 1,500 additional pounds over previous models to provide the reliability and grunt needed when tackling the trails or work around the land.