Total Landscape Care Digital Magazine
Issue link: http://read.dmtmag.com/i/165924
equipment matters Another mistake many new operators make is immediately setting the backhoe to full throttle. "This is an unnecessary waste of fuel and energy with the introduction of variable-volume piston pumps that help provide power as needed," Pullen says. You can set it below full throttle and still tackle the job. "We suggest that operators always operate their backhoe loader at the lowest engine speed that completes a task, generally between 1,500 to 1,800 rpm," Wright says. Work smarter, not harder Cycle times can add up. So, instead of swinging a scoop of dirt out 90 degrees, only move the backhoe arm about 20 degrees and dump it. "It may not seem like a big difference, but all of that extra work adds up over time and requires unnecessary fuel and time, while also putting extra wear on the machine," Pullen says. Cutting down on your digging distance can also When scooping dirt, swinging the arm out only 20 degrees and dumping it cuts down on unnecessary fuel and time usage. THIS IS WHERE LESSER ENG IN Kawasaki 2-cycle engines are tough, use 87-octane gas, and have machined crankshafts, ball bearings, two-ring pistons, chrome-lined cylinders, and the maximum durability rating. Kawasaki 4-cycle engines are the #1 choice of the pros*, Text INFO to 205-289-3796 or visit TLCrequest.com 18 To ta l L a n d s c ap eC are.c om S E P T E M B E R 2 013 Untitled-60 1 TLC0913_EquipMatters.indd 18 8/27/13 9:19 AM deliv best