Issue link: http://read.dmtmag.com/i/30009
Roll Benders Ask Praxair to help you lower your cost of operations and increase productivity. Hydraulic PRS R-H55 Hydraulic Roll Bender The PRS R-H55 angle roller is perfect for roll bending round tube and pipe, sections, bar, and angle iron. This machine consists of three driven rolls that are inverter-driven through a direct- drive transmission that offers greater power and overload protection. Comes standard with a set of segment rolls, lateral roll guides for coiling, and an operator-friendly control station. Capacity Pipe Round Tube Square Tube Angle Iron Solid Square Solid Round Flat Bar Easy Way Flat Bar Hard Way Specifications Roll Adjustment Pinch Shaft Diameter Roll Diameter Upper Roll Diameter Lower Shaft Center Distance (lower rolls) Driven Rolls Digital Readout Speeds Motor Power Requirement Dimensions (L/W/H) Weight All specs based on 60,000 psi (42 kg/mm2 2.5” (sch. 40)/40” 4” (.078”)/72” 2.75” (.083”)/54” 3” (.250”)/36” 1.75”/28” 2”/28” 5”/28” 3.5” (.675’)/32” Hydraulic Single 55 mm/2.165” 170 mm/6.693” 170 mm/6.693” 11.875” 3 Yes 11 rpm 5 hp 220V, 3-phase 60”/44”/68” 1,728 lbs. ) tensile strength mild steel Quick Specs Three driven rolls Hydraulic top roll positioning Horizontal or vertical bending Digital readout 220V, 3-phase