Issue link: http://read.dmtmag.com/i/30009
METAL FORMING ProStar Roll Benders ™ PRS R-H150 Double Pinch Hydraulic Roll Bender Perfect for roll bending round tube and pipe, sections, bar, and angle iron, the ProStar PRS P-H150 consists of three inverter-driven rolls through a direct-drive transmission that offers greater power and overload protection. Built from a heavy steel plate frame, mounted on a rigid steel housing, the PRS R-H150 can be operated in vertical mode for smaller diameters and laid on its back for horizontal bending when larger diameters are required. Capacity Pipe Quick Specs Electric back gauge with 5-1/2” Sch. 40 pipe capacity Double pinch Lateral angle guide rolls Horizontal or vertical bending Overload protected Hydraulic drive Round Tube Square Tube Angle Iron Solid Square Solid Round Flat Bar Easy Way Flat Bar Hard Way Specifications Roll Adjustment Pinch Shaft Diameter Roll Diameter Upper Roll Diameter Lower Driven Rolls Digital Readout Speeds Motor Power Requirement Shipping Dimensions (L/W/H) Shipping Weight All specs based on 60,000 psi (42 kg/mm2 5.5” (sch.40)/73” 6.250” (.125”)/118” 4” (.196”)/118” 4.75” (.5”)/60” 3”/32” 3.375”/36” 7.875” (2”)/40” 5.5” (1.125”)/118” Hydraulic Double 4.724”/120 mm 15.354”/390 mm 15.354”/390 mm 3 Yes 3.25 rpm 20 hp 220V, 3-phase 80” x 67” x 82” 10,400 lbs. ) tensile strength mild steel