Issue link: https://read.dmtmag.com/i/76867
WC2200 12-Volt Pulse Charger® • Uses 110-Volt or 220-Volt AC power • Batteries cannot be overcharged • LEDs indicate 25%, 50%, 75% and 100% charge state The Pulse Charger World Version Plus combines a state-of-the-art charging system with patented pulse technology and uses 110-Volt or 220-Volt AC power for world wide use. The voltage regulated, microprocessor controlled Pulse Charger provides all the charge a battery will accept by constantly mon- itoring the 12-Volt battery and adjusting the charge current accordingly. When the optimum charge level is reached, it automatically switches to float mode to prevent overcharging. The Pulse Charger emits a series of DC current high fre- quency pulse shaped waves to reduce sulfation buildup which occurs as lead sulfates form on the battery plates during normal charge/discharge cycles. These deposits can reduce the battery's ability to accept and keep a charge. Our pulse technology breaks down the deposits, to improve battery performance and extend battery life. Use the Pulse Charger to return unreliable gel cell and sealed "maintenance- free" batteries to service. Colored LEDs make it easy to understand, indicating the battery's state of charge, as well as when it's charging, pulsing or bad and not rechargeable. Unit comes in a portable, heavy duty case. 746X725 NSN 6130-01-477-4703 WC2200 12-Volt Pulse Charger World Version Plus Specifications Output Current: 20 Amps Maximum Input Current: 100 V AC to 250 V AC 3 Amps Max @ 100 V AC Dimensions: 14.2" x 11.5" x 6.5" Weight: 11.1 lbs. Battery Cord Length: 6' Battery Clamp Cable Length: 6' 24V Dual Two-Station Pulse Charger® • Works with 24-Volt lead-acid VRLA, AGM and flooded batteries • Uses 110-Volt or 220-Volt AC power • Green mode auto shut off when batteries are not connected The two station Pulse Charger World Version can reduce battery-related equip- ment down time, maintenance and cost. This state-of-the-art charging system works with 24-Volt lead-acid VRLA, AGM and flooded batteries, uses 110-Volt or 220-Volt AC power and comes in a portable heavy duty case. The voltage regulated, microprocessor controlled charger will provide all the charge needed to charge a battery to the optimum level. When reached, it switches to float mode so the battery cannot be overcharged. Throughout the process sulfation build- up is reduced, improving performance and extending battery life. Colored LEDs indicate the battery's state of charge, as well as when it's charging, pulsing or bad and not rechargeable. New Green Mode feature reduces input power consumption to less than one watt when AC power is applied and no batteries are connected. When a battery is con- nected the unit wakes up. Green mode operates independently for both outputs. 746X840 NSN Pending 24V Dual Two-Station Pulse Charger Specifications Output Current: 3.5 Amps Max per output Input Current: 100 V AC to 250 V AC 2.33 Amps Max (@ 100 V AC in and I-out = 3.5 Amps x 2) Dimensions: 14.2" x 11.5" x 6.5" Weight: 10.1 lbs. Battery Cord Length: 6' Battery Clamp Cable Length: 6' 800-580-7554 www.pulsetech.net 9 World Version Plus BATTERY SHOP CHARGERS