Michelin Demo

Digital Toolbox

Issue link: http://read.dmtmag.com/i/41477

Contents of this Issue

Navigation

Page 105 of 282

Appendix TUBE-TYPE TUBES, FLAPS AND VALVES A tire cannot perform properly unless it is mounted properly on the correct size wheel. The following are general instructions for demounting and mounting MICHELIN® tube-type tires. For detailed instructions on mounting and demounting truck tires on particular types of wheels, refer to the instructions of the wheel manufacturer or the RMA (Rubber Manufacturers Association) wall charts. Do not reinflate any tires that have been run underinflated or flat without careful inspection for damage. If run-flat damage is detected, scrap the tire. A tire is considered run-flat if it is found to be less than 80% of normal recommended operating pressure. This can result in serious injury or death. The tire may be damaged on the inside and can explode during inflation. The wheel parts may be worn, damaged, or dislodged and can explosively separate. SIZE 10.00R15 10.00R20 365/80R20 14.00R20 G20 (14.00R20) 395/85R20 16.00R20 12.00R24 TUBES AND FLAPS FOR COMMERCIAL TRUCK TIRES TUBE 15P 20N 20Q TUBE MSPN 04560 17078 39144 20S 20V 24Q 32420 32961 11708 FLAP 15x7.50 20x7.50 FLAP MSPN 58753 44274 20x10.00 47501 24/25x8.50 48842 Product T igre grease MOUNTING LUBRICANT Size 4 Kg Product code 25817 86

Articles in this issue

Archives of this issue

view archives of Michelin Demo - Digital Toolbox