Issue link: http://read.dmtmag.com/i/34501
GENERAL INSTRUCTIONS FOR TUBELESS MOUNTING/DEMOUNTING In order for a tire to perform properly, it must be mounted on the correct size rim or wheel. The following are general instructions for mounting and demounting MICHELIN tubeless tires, including the MICHELIN X One tires. Specifics for 19.5" wheels are detailed in the Mounting Tubeless Tire section (Page 23). For additional detailed ® ® ® instructions on mounting and demounting truck tires on particular types of rims and wheels, refer to the instructions of the rim and wheel manufacturer or the RMA wall charts. Inspect rim for excessive wear or damage. Correctly position and properly torque the valve stem: 80-125 in/lbs (7-11 ft/lbs) for standard aluminum wheels and 35-55 in/lbs (3-5 ft/lbs) for standard tubeless steel wheels. 1 2 Fully lubricate both flanges and the drop center. Fully lubricate both beads and the inside of the 3 bead that will be the last one mounted. Place rim in correct position, short side up (drop 4 center up). Do not use your knee to place the tire; use the 5 proper tools. 18 Section Two: Mounting the Tire Place the tire on the wheel using a rocking motion with adequate downward pressure (the bottom bead may drop over the wheel flange). 6