Issue link: http://read.dmtmag.com/i/34501
19.5" Steel Wheels Fully lubricate both flanges and 1 the drop center. 2 Fully lubricate both beads and the inside of the bead that will be the last one mounted. Start with short (narrow) side 3 up, disc face down. Work tire on with proper tube- 4 less tire tools. 5 Do not use a duck bill hammer here! Place part of second bead in 6 drop center. Using the proper tool, seat the 7 second bead. Do not use a duck bill hammer here! 8 Use the proper tool to obtain the correct bite. 9 Turn over assembly, laying horizontal, inflate to no more than 5 psi, and following proper procedures, complete inflation process using Safety Cage (per OSHA standards). Section Two: Mounting the Tire 25