Issue link: http://read.dmtmag.com/i/34501
GENERAL INSTRUCTIONS FOR TUBE-TYPE DEMOUNTING/MOUNTING A tire cannot perform properly unless it is mounted properly on the correct size rim or wheel. The following are general instructions for demounting and mounting MICHELIN tube-type tires. For detailed instructions on mounting and ® demounting truck tires on particular types of rims and wheels, refer to the instructions of the rim and wheel manufacturer or the RMA (Rubber Manufacturers Association) wall charts. Do not reinflate any tires that have been run underinflated or flat without careful inspection for damage. If run-flat damage is detected, scrap the tire. A tire is considered run-flat if it is found to be less than 80% of normal recommended operating pressure. This can result in serious injury or death. The tire may be damaged on the inside and can explode while you are adding air. The rim parts may be worn, damaged, or dislodged and can explosively separate. SIZE 7.50R15 8.25R15 10.00R15 9.00R16 7.50R17 335/80R20 275/80R20 365/80R20 15.5/80R20 14.00R20 14.5R20 395/85R20 365/85R20 16.00R20 10.00R20 11.00R20 12.00R20 12.00R24 TUBES AND FLAPS FOR COMMERCIAL TRUCK TIRES TUBE 15/16J 15/16J 15P 16N 17K 20P 20P 20Q 20S 20S 20S 20S 20S 20V 20N 20P 20Q 24Q TUBE MSPN *73993 *73993 04560 17786 26362 06934 06934 39144 32420 32420 32420 32420 32420 32961 17078 06934 39144 11708 * Use tube MSPN 73993 for CAT Forklifts (15/16J with valve 1221), other truck / industrial applications, use MSPN 17542 (15/16J with valve 570). MSPN 17542 uses same flap and is the same price as MSPN 73993. FLAP 15x6.00 15x6.00 15x7.50 16x6.00D 17X6.00D 20x10.00 20x10.00 20x10.00 20x10.00 20x10.00 20x10.00 20x10.00 20x10.00 20x10.00 20x7.50 20x8.50 20x8.50 24/25x8.50 FLAP MSPN 62152 62152 58753 94605 45608 47501 47501 47501 47501 47501 47501 47501 47501 47501 44274 49781 49781 48842 Product T igre grease MOUNTING LUBRICANT Size 4 Kg Product code 25817 Section Seven: Diagonal (Bias or Cross) Ply and Tube-Type 93