Issue link: http://read.dmtmag.com/i/34501
Be sure to start at the valve stem, 4 not away from or opposite. Step forward into the drop 5 center, laying the bars down. 6 Progressively work tools around the rim until the first bead is off the rim. 7 Completely unseat the first bead. Failure to work with small sections on a non-lubricated bead will result in 8 unnecessary damage to the bead. 9 Lift the assembly, place the tire iron inside, rotate to lock the tab against the flange. Allow the assembly to drop, and 10 rock the tire from the wheel. Section Two: Mounting the Tire 29