Overdrive Magazine | Trucking Business News & Owner Operator Info
Issue link: http://read.dmtmag.com/i/87831
CUSTOM RIGS LIGHTS High-power LEDs United Pacific's rectangular crystal headlight fea- tures one high-power LED and six LED position lights, available in low- or high-beam modules. Both applications are 12-24 volt DC input. The low-beam application is 0.50-0.60 amps at 13.5 volts DC (9 watts) and 0.25-0.35 amps at 28 volts DC (10 watts) with a lumen output of 550. The high beam application is 0.90-1.10 amps at 13.5 volts DC (15 watts) and 0.50-0.60 amps at 28 volts DC (17 watts) with a lumen output of 620. The light measures 6 inches by 4 inches. United Pacific Industries, uapac.com, 800-790-6988. Text INFO to 50298 or visit ovdinfo.com. Phoenix P1 lights Phoenix Design & Manufacturing's P1 lights fea- ture a circuit board fully immersed in epoxy resin to protect against vibration and water intrusion. It also has engineered optics, an internal reflector plate and 135-degree LEDs, which distribute the light over the entire lens and give a variety of optical effects from different angles. The lights also feature concealed mounting fas- teners under a bezel. The wires exit the lamp base through silicone sleeves to aid against wire chafing, and the lights are not polar-sensitive, so either wire can be positive and the other a ground. Phoenix Design & Manufacturing, phoenixdesignmfg.com, 888-789-2550. Text INFO to 50298 or visit ovdinfo.com. M1 LED light Dieter's M1 light, part of its Millennium Series line, features a high quality polycarbonate lens surrounded by a polycarbonate bezel with chrome plating. The M1 light comes in amber incandescent, red incandescent, amber LED, red LED, clear lens with amber LED and clear lens with red LED. The light is 6.625 inches by 2.19 inches. The LED is a 12V, 0.12 amp light, and the incandescent comes in 12V, 0.33 amp and 24V, 0.17 amp varieties. Dieter's Accessories, parts.dietersaccessories.com, 877-884-8555. Text INFO to 50298 or visit ovdinfo.com. The new Flatline Marker Light by Trux Accessories features 30 high-output LEDs sonic-welded to a circuit board and base. Air is sucked out of the light to prevent condensation, protecting the diodes from moisture. The TLED-FGCA marker light has slotted mounting holes so it can replace almost any oval light in the market, the company says. No drilling is Flatline Marker Light necessary in most cases. Trux Accessories, truxaccessories.com. Text INFO to 50298 or visit ovdinfo.com. 66 | Overdrive | November 2012