World Fence News

September 2013

Issue link: https://read.dmtmag.com/i/155946

Contents of this Issue

Navigation

Page 12 of 89

Locinox H-COMPACT completes firm's line of hybrid mortice gate locks Locinox has recently introduced the H-COMPACT mortice lock, which, along with the H-METAL lock and the H-WOOD lock which were launched earlier this year, completes the company's range of hybrid mortice locks. The H-COMPACT is especially suited for automated sliding gates where an extra manual closure of the gate is desired. The lock has no handles for a clean, aesthetic look. An anti-theft pin which makes it impossible to lift the gate can be easily removed by the gate owner. This makes it possible to install and use the H-COMPACT lock in swing gates, the manufacturer noted. The mechanism, front plate and chassis are made of 100% stainless steel so that the H-COMPACT is protected against the most severe weather conditions and is extremely durable. A stainless steel hook with a 33 mm throw guarantees safe night locking, especially when used with the allnew SHKC keep. With the introduction of the new H-COMPACT lock, Locinox now offers a complete range of mortice locks including the H-METAL for metal gates, H-WOOD for wooden gates and the H-COMPACT for sliding gates. Locinox, located in Waregem, Belgium, is a leading developer and manufacturer of products for the fencing and gate industry throughout the world. Locinox products are marketed in North America by Locinox USA, Inc. For more information, call 877-5624669 or e-mail sales@lxusa.com. Further information is available at www.locinox.com. D&D. First in gate safety. #1 in the World. When it comes to the life of a child, there's no substitute for quality. ADA Compliant Adapts to all gates Ensured secure latching Consistent performance Exceptional quality Key-lockable Quick & easy install Limited Lifetime Warranty Fence ordinances from around the country As part of an ongoing and longstanding series, World Fence News offers this "snapshot" of building ordinances which affect fence installations from municipalities across the United States and Canada. This information was taken from official internet sites, but you should always consult the appropriate building departments where you plan to work for specific requirements. Allen Park, Michigan Definitions. Boundary fence means any structure or partition that is more than 12 inches in height and constructed or erected parallel to and on or within three feet of any lot line. Decorative fence means any structure, partition or chain dividing a piece of land, other than a boundary fence, into distinct portions or into two or more separate contiguous parcels of land, regardless of the size of the resulting parcels. A decorative fence shall include any fence, structure, partition or other similar border that is more than 12 inches in height but less than 31 inches in height. Prior to the construction of any fence, an application for a permit to construct the fence shall be filed with the building department. No fence shall be constructed without first obtaining this permit. A plan showing the location and dimensions of the proposed fence, and a statement of type of fence, its material and height shall be submitted with the permit application. Boundary fences shall also include a mortgage survey or, at the building inspector's request, a recent survey signed and sealed by a registered land surveyor, showing the proposed fence location and the location and dimensions of the property. Construction requirements. All fences shall comply with the following requirements: (1) All fence posts shall be set at least 42 inches below grade and all post holes shall be inspected prior to setting the post; (2) The fence shall be erected one inch off the lot line, unless the fence abuts a city sidewalk, at which location the fence shall be at least 12 inches from the edge of the sidewalk. Any fence erected alongside of an existing fence shall be placed at least six inches from the existing fence and shall not be attached to the existing fence; (3) All bracing for the fence, including cross bars and nailer strips, shall be on the installer's side of the fence; (4) When installed alongside of an existing fence, all sections of privacy fence between the posts shall be removable for maintenance. This provision shall not apply if a plastic, metal or similar type fence material is used; (5) All fences shall comply with all other state construction code requirements; and (6) All fences shall have a final continued on page 72 ® MAGNALatch ® Only D&D provides the MagnaLatch KeyTag. Because liability does not end with the warranty on your gate. MagnaLatch Top Pulls and Vertical Pulls now come with a "How-to Adjust" sticker on the vertical tube, as well as a keytag providing an adjustment statement for gate owners to understand that over time the gate latch and hinges may need adjustment to continue to operate effectively. Hi-Performance Hardware D&D Technologies 7731 Woodwind Drive, Huntington Beach, CA 92647 Tel: 1-800-716-0888 or 1-714-677-1300. info@ddtechusa.com www.ddtechglobal.com

Articles in this issue

Links on this page

Archives of this issue

view archives of World Fence News - September 2013